Beschrijving

CNC Aluminum Hopup Chamber MXW unit is precisely machined to perform accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series. The Hopup Chamber MXW unit is built with an aluminum Rotary Dial Knob for fine hopup adjustments, the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot. The Hopup Chamber MXW unit is designed to accept the HPA MTW Engine M4 nozzle length, and fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use. The Hopup Chamber MXW unit is wisely equipped with a self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm to 11.5mm inner bore HPA Engine nozzle outlet without wobbling. Also mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots, and included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting.

***Test results: FPS might be increased from 10FPS to 30FPS over the stock setup. Please check your FPS!

Includes
product_right_arrow.png 1 x CNC Aluminum Hopup Chamber MXW unit
product_right_arrow.png 2 x CNC Brass 2.6mm Side Wing
product_right_arrow.png 1 x CNC Steel Pivot Pin
product_right_arrow.png 1 x CNC Aluminum Hopup Lever
product_right_arrow.png 1 x CNC Aluminum Soft Flat Nub (4mm)
product_right_arrow.png 1 x Steel Nub Spring
product_right_arrow.png 1 x CNC Delrin Locking C-Clip
product_right_arrow.png 1 x CNC Brass Barrel Spacer
product_right_arrow.png 1 x Brass Barrel Spacer Holder Oring
product_right_arrow.png 1 x CNC Aluminum Rotary Dial Knob

 

Specification
product_right_arrow.png Overall Length: 51.15mm
product_right_arrow.png Overall Height: 22mm
product_right_arrow.png Inlet Diameter (to fit into HPA Nozzle Outlet): 11mm to 11.5mm
product_right_arrow.png Hub Outer Diameter (to fit into Outer Barrel): 12mm
product_right_arrow.png Hub Inner Diameter (to fit Nozzle): 7mm
product_right_arrow.png Material: Aluminum 6061

 

Features
product_right_arrow.png Machined from a solid aircraft aluminum block with tight tolerances to achieve the most accuracy, consistency, and durability
product_right_arrow.png Performed accurately and consistently on HPA MTW Milspec, Forged, Billet and MTW-9 series
product_right_arrow.png Precision Rotary Dial Knob for fine hopup adjustments
product_right_arrow.png Re-engineered the precision Hopup Lever and 4mm Bucking Nubs (6mm Bucking Nubs are optional) to perform best with R-Hop and Standard-Hop to keep the BB shooting accurately and consistently on every single shot
product_right_arrow.png Removable Steel Pivot Pin for ease of setup and maintenance
product_right_arrow.png Accepted the HPA MTW Engine M4 nozzle length
product_right_arrow.png Fully compatible with most aftermarket soft and hard rubber buckings without losing FPS or dropping BB during use
product_right_arrow.png Wisely equipped with a self-centering inlet O-ring to ensure the hopup unit is inserted exactly in the center of the 11mm inner bore HPA Engine nozzle outlet without wobbling
product_right_arrow.png Mounted the removable CNC Brass Side Wings to slide smoothly into the outer barrel slots
product_right_arrow.png Included an advanced CNC Delrin Locking C-Clip to hold the inner barrel tight in place without wobbling and twisting
product_right_arrow.png Compatible with any 11mm to 11.5mm inner bore HPA Engine nozzle outlets

 

Usage
product_right_arrow.png Compatible with most HPA MTW Milspec, Forged, Billet and MTW-9 series

 

Requires
product_right_arrow.png Wearing eye protection is recommended
product_right_arrow.png Use proper tools for disassembly and reassembly the gear box with great care due to spring tension
product_right_arrow.png Bearing lubricant oil/grease is recommended for smooth operation

 

Instruction
product_right_arrow.png Instruction Manuals are included