Vragen, stel ze gerust!
  • Maxx Model CNC Advanced Speed Trigger Style E Black for MTW

    Toevoegen aan winkelwagen Details
  • Niet op voorraad

    Maxx Model CNC Advanced Speed Trigger Style E Gold for MTW

    Details
  • Maxx Model CNC Advanced Speed Trigger Style E red for MTW

    Toevoegen aan winkelwagen Details
  • Toevoegen aan winkelwagen Details
  • Niet op voorraad

    MTW Wolverine - Trigger Assembly

    Details
  • Wolverine / Heretic Labs - MTW Speed trigger

    Toevoegen aan winkelwagen Details
  • WOLVERINE AIRSOFT 2nd Gen. 18" Wire Harness This is the replacement 18" wire harness for your Wolverine HPA engines.
    Toevoegen aan winkelwagen Details
  • Niet op voorraad
    The Wolverine Airsoft Filtered Grip line is an accessory well worth the investment! The integrated filter element in the QD fitting keeps dirt and debris out of your system, keeping it running smoothly in the toughest environments. Compatible with GEN2 Inferno, GEN2 HYDRA, and REAPER. If you prefer a grip connect on your replica, Check out the Filtered Grip Connect! Length : 5 inches / 12,7cm
    Details
  • Niet op voorraad
    The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind. The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the “open bolt problem”. It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, etc… and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. SPECIFICATIONS
    • Patent Pending independent poppet and nozzle design
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft’s Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS–> No negative impact on reliability!
    • Estimated 10-15% efficiency improvement
    • Typical Velocity: 250 – 500 FPS (.2 BBs)
    • Energy: 1 – 2.5 Joules
    • Operating Pressure: 60 – 140 PSI
    • Rate of Fire: 5 – 35 PSI
    Details
  • The GEN 2 Inferno is the culmination of a great deal of work to take the next step forward in the development of HPA technology. Over the past couple years since we launched the SMP, multiple other companies saw the value of this type of technology and have attempted to replicate its performance. The Gen2 once again leaves everyone far behind. The GEN 2 Inferno features a revolutionary single solenoid, independent poppet and nozzle design that sets a new standard for a drop in kit. Particularly, it is designed to solve the open bolt problem. It is a hybrid design which keeps the advantages of an open bolt system: easy tuning, no first round dry fire, efficiency, etc... and adds the simplicity of easier hop up tuning that closed bolt systems have traditionally offered. In addition, it further improves the efficiency over our previous systems by an estimated 10-15%. Here are a few highlights! Features:
    • Patent Pending independent poppet and nozzle design
    • Hybrid design allows pause between bb loading and bb firing
    • Improves hop up performance with a wide range of stock and aftermarket options
    • Still uses Wolverine Airsoft's Patent Pending Imbalanced Poppet
    • Backwards compatible with all Wolverine Airsoft electronics.
    • Still uses bullet proof direct solenoid fired design
    • NO ADDITIONAL CRITICAL ORINGS--> No negative impact on reliability!
    • Estimated 10-15% efficiency improvementFor details about installation, please visit https://wolverineairsoft.com/installationtips/.
    Toevoegen aan winkelwagen Details
  • Wolverine Airsoft PHOENIX Hop for MTW - INVICTUS
    Toevoegen aan winkelwagen Details
  • Niet op voorraad
    Details
  •    
    Toevoegen aan winkelwagen Details
  • Features

    • Includes everything required to use 12g, 33g CO2 cartridges or standard HPA tanks.
    • Rapidly change 12g CO2 cartridges with 2-start threaded cap featuring magnetic cartridge extractor.
    • Maximize your CO2 consistency with 2X larger expansion chamber.
    • Built-in STORM Category 5 regulator for uncompromised performance.

    No Line, No Compromise!

    Untether the performance of your MTW without compromise with the WRAITH X. Everything is included in the box to run your choice of 12g CO2 or 33g CO2 inside the milspec buffer tube or a standard HPA tank. WRAITH X includes all the advantages of the STORM Category 5 regulator which provides faster and more consistent pressure even in the most demanding of applications, from high refresh rate and low pressure SMGs all the way to high pressure precision required for advanced snipers. Want HPA performance without a line but not sure which air source to choose? Don™t chooseget it all with the WRAITH X. Manufacturer: Wolverine Airsoft

    Specifications:

    Dimensions: 10.25" x 3.25" x 2" Weight: 0.76lb Application: Use CO2 cartridges or a HPA tank to power your HPA M4 Gas Type: 12g CO2, 33g CO2, 13/3000 HPA Tank Pressure range: 60-180 psi Output energy: 1.0 2.5J adjustable (build dependent) Approx. Shot Count:
    • Per 12g CO2 Cartridge: 200 shots
    • Per 33g CO2 Cartridge: 500 shots
    • Per 13/3000 cu HPA Tank: 1000 shots
    Compatibility: Wolverine Airsoft MTW M4 AEG receivers, Wolverine Inferno and most other HPA engines (Check with manufacturer) Package Includes: Wraith Storm Cat 5 Regulator, Milspec Buffer Tube, CO2 Expansion Chamber, 12g Cartridge holder & Cap, Hardpoint Adapter, Mini Airline, Pistol Grip Base Plate, Allen Wrenches, O-Ring Kit, 2"x 3" Wraith X Patch Material: Aluminum alloy Disclaimer: Professional installation highly recommended. Please use discretion when installing custom parts as fit and compatibility may vary. Modification may be required. Professional installation recommended.
    Toevoegen aan winkelwagen Details

Ga naar de bovenkant